HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 301

Item Item LED LED
1 Fault/Locate
2 Online/Activity
DSC-25 2-port SFP28 card ports and LEDs DSC-25 2-port SFP28 card ports and LEDs
Ports Ports
Item Item Port Port
1 Management port
2 Network interface port 10/25G SFP+ based
3 Network interface port 10/25G SFP+ based
LEDs LEDs
The HPE for Pensando DSP DSC-25 2p SFP28 card is a dual-port, single-slot, half-height, half-length (HHHL) SFP28 network adapter. It has
LEDs for Link (L) and Activity (A) for each port. A half-height bracket is shown in the following illustration with SFP28 ports and LEDs.
State State Definition Definition
Solid amber This drive has failed, is unsupported, or is invalid.
Solid blue The drive is operating normally and being identified by a
management application.
Flashing amber/blue (1 The drive has failed, or a predictive failure alert has been received
flash per second) for this drive. The drive has also been identified by a management
application.
Flashing amber (1 flash A predictive failure alert has been received for this drive. Replace
per second) the drive as soon as possible.
Off The drive is operating normally and not being identified by a
management application.
Solid green The drive is online and has no activity.
Flashing green (4 The drive is operating normally and has activity.
flashes per second)
Off No power present
Description Description
1GbE RJ45
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 301