Table of Contents
Advertisement
11. Remove the boot device carrier:
a. Press and hold the carrier latch (callout 1).
b. Pivot the latch to open (callouts 2).
c. Slide the carrier out from the boot device cage (callout 3).
12. Remove the SSD from the boot device carrier:
a. Remove the SSD mounting screw (callout 1).
b. Tilt the SSD with the M.2 slot at a 45° angle (callout 2).
c. Carefully remove the SSD from the M.2 slot (callout 3).
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide
205
Advertisement
Table of Contents
