HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 187

3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack .
6. Place the server on a flat, level work surface.
7. Remove the access panel .
8. If the server is in the rear 4 LFF drive configuration, remove the rear 4 LFF drive cage .
9. Remove the primary riser cage.
10. Unplug the USB device from the USB port.
Results Results
To replace the component, reverse the removal procedure.
HPE NS204i Boot Device HPE NS204i Boot Device replacement
Subtopics Subtopics
Removing and replacing the boot device cage assembly from NS204i-u + low-profile riser cage Removing and replacing the boot device cage assembly from NS204i-u + low-profile riser cage
Removing and replacing the boot device cage assembly on top of the power supply cage Removing and replacing the boot device cage assembly on top of the power supply cage
Removing and replacing the boot device cage assembly from the secondary three-slot riser cage Removing and replacing the boot device cage assembly from the secondary three-slot riser cage
Removing and replacing a boot device carrier with a security cover installed Removing and replacing a boot device carrier with a security cover installed
Removing and replacing a boot device carrier without a security cover installed Removing and replacing a boot device carrier without a security cover installed
Removing and replacing a boot device drive with a security cover installed Removing and replacing a boot device drive with a security cover installed
Removing and replacing a boot device drive without a security cover installed Removing and replacing a boot device drive without a security cover installed
Removing and replacing the boot device cage assembly from NS204i-u + low-profile riser Removing and replacing the boot device cage assembly from NS204i-u + low-profile riser
cage cage
replacement
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 187