HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 202

4. Remove the SSDs from the boot device carrier:
a. Remove the SSD mounting screw (callout 1).
b. Tilt the SSD with the M.2 slot at a 45° angle (callout 2).
c. Carefully remove the SSD from the M.2 slot (callout 3).
Retain these SSDs for installation onto the new boot device carrier.
Results Results
To replace the component, reverse the removal procedure.
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 202