HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 212

19. Connect each power cord to the power source.
20. Power up the server .
21. Properly dispose of the old battery.
For more information about proper battery disposal, contact an authorized reseller or an authorized service provider.
Results Results
The installation is complete.
Heatsink replacement Heatsink replacement
Subtopics Subtopics
Removing the heatsink Removing the heatsink
Installing the heatsink Installing the heatsink
Removing the heatsink Removing the heatsink
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have a T-20 Torx screwdriver available.
About this task About this task
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to WARNING:
cool before touching them.
CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
Procedure Procedure
1. Power down the server.
2. If installed, open the cable management arm.
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 212