HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 72

b. To disengage the access panel from the chassis, press the release button and pull up the latch (callouts 2 and 3).
c. Lift the access panel (callout 4).
Results Results
To replace the component, reverse the removal procedure.
Removing and replacing the air baffle Removing and replacing the air baffle
About this task About this task
CAUTION: For proper cooling, do not operate the server without the access panel, baffles, expansion slot covers, or blanks CAUTION:
installed. If the server supports hot-plug components, minimize the amount of time the access panel is open.
Procedure Procedure
1. Power down the server.
2. If installed, open the cable management arm.
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 72