HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 65

Remove the riser cage Remove the riser cage
Prerequisites Prerequisites
If removing the three-slot riser cage or tertiary riser cage, make sure that you have a T-15 Torx screwdriver available.
About this task About this task
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to WARNING:
cool before touching them.
Procedure Procedure
1. Power down the server.
2. If installed, open the cable management arm.
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 65