Table of Contents
Advertisement
4. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
5. Disconnect all peripheral cables from the server.
6. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
7. Remove the access panel .
8. Disconnect the Systems Insight Display cable from the system board .
9. Remove the SID.
Retain the T-10 screw for later use.
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide
87
Advertisement
Table of Contents
