HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 180

11. Remove the 2 SFF stacked drive backplane:
a. Remove the backplane screws (callout 1).
b. Remove the backplane from the drive cage (callout 2).
Results Results
To replace the component, reverse the removal procedure.
Removing and replacing the 12 E3.S Removing and replacing the 12
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
About this task About this task
E3.S drive backplane drive backplane
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 180