HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 227

CAUTION: THE CONTACTS ARE VERY FRAGILE AND EASILY DAMAGED. CAUTION: THE CONTACTS ARE VERY FRAGILE AND EASILY DAMAGED. To avoid damage to the socket or processor, do
not touch the contacts.
Removing the processor Removing the processor
Prerequisites Prerequisites
Identify the processor and socket components .
Review the processor cautions .
Before you perform this procedure, make sure that you have the following items available:
T-20 Torx screwdriver
Alcohol wipe
Procedure Procedure
1. Power down the server.
2. If installed, open the cable management arm.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack .
6. Place the server on a flat, level work surface.
7. Remove the access panel .
8. Do one of the following:
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 227