HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 105

Results Results
To replace the component, reverse the removal procedure.
Removing and replacing the universal media bay cage Removing and replacing the universal media bay cage
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the following items available:
T-10 Torx screwdriver
T-15 Torx screwdriver
Procedure Procedure
1. Back up all server data.
2. If installed, remove the front bezel .
3. If installed, remove all drives from the 2 SFF stacked drive cage.
4. Power down the server.
5. If installed, open the cable management arm.
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 105