Table of Contents
Advertisement
12. Place the heatsink on a flat work surface with its contact side facing up.
13. Use an alcohol wipe to remove the existing thermal grease from the heatsink and processor.
Allow the alcohol to evaporate before continuing.
14. Remove the processor:
a. While holding the sides of the retention frame, loosen the frame screw (callout 1).
This retention frame is spring-loaded. Once the screw is loosened enough, hold the retention frame as it automatically pivots to a
vertical position (callout 2) .
b. Hold the lift tabs and pivot the rail frame to the vertical position (callout 1).
c. Slide the processor out of the rail frame (callout 2).
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide
234
Advertisement
Table of Contents
