Table of Contents
Advertisement
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack .
6. Place the server on a flat, level work surface.
7. Remove the access panel .
8. Do one of the following:
a. Remove the air baffle .
b. Remove the midplane drive cage .
9. If installed, remove the cable guards .
10. Remove the fan cage.
11. Disconnect the front I/O and USB cable from the system board .
12. Remove the right chassis ear assembly:
a. Remove front right chassis ear screws (callouts 1).
Retain all screws for future use.
b. Pull the right chassis ear and front I/O and USB cable (callout 2).
Results
Results
To replace the component, reverse the removal procedure.
Removing and replacing the left chassis ear
Removing and replacing the left chassis ear
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide
119
Advertisement
Table of Contents
