Table of Contents
Advertisement
13. Remove the boot device:
a. Remove the screws from the from the boot device bracket (callout 1).
b. Remove the boot device assembly from the riser cage slot (callout 2).
14. Remove the boot device from the boot device bracket.
15. Remove the boot device carrier:
a. Press and hold the carrier latch (callout 1).
b. Pivot the latch to open (callouts 2).
c. Slide the carrier out from the boot device cage (callout 3).
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide
195
Advertisement
Table of Contents
