Table of Contents
Advertisement
4. Power down the server.
5. If installed, open the cable management arm.
6. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
7. Disconnect all peripheral cables from the server.
8. Remove the server from the rack .
9. Place the server on a flat, level work surface.
10. Remove the access panel .
11. Do one of the following:
a. Remove the air baffle .
b. Remove the midplane drive cage .
12. Remove the fan cage.
13. Remove the midwall bracket .
14. Remove the universal media bay:
a. Remove the universal media bay screws (callout 1).
b. Remove the universal media bay from the server (callout 2).
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide
111
Advertisement
Table of Contents
