HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 226

4. Do one of the following:
a. Install the air baffle.
b. Install the midplane drive cage.
5. Install the access panel.
6. Install the server into the rack.
7. Connect all peripheral cables to the server.
8. Connect each power cord to the server.
9. Connect each power cord to the power source.
10. Power up the server .
11. If removed, install the front bezel.
Processor replacement Processor replacement
Subtopics Subtopics
Processor cautions Processor cautions
Removing the processor Removing the processor
Installing the processor Installing the processor
Processor cautions Processor cautions
CAUTION: To avoid damage to the processor or system board, only authorized personnel should attempt to replace or CAUTION:
install the processor in this server.
CAUTION: If installing a processor with a faster speed, update the system ROM before installing the processor. CAUTION:
To download firmware and view installation instructions, see the Hewlett Packard Enterprise Support Center website Hewlett Packard Enterprise Support Center website .
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 226