10. Remove the tertiary riser cage .
11. Remove the expansion card .
12. Remove the risers from the tertiary riser cage.
13. Detach the free-height riser and the stacking riser.
Results
Results
To replace the component, reverse the removal procedure.
Removing and replacing the GPU riser
Removing and replacing the GPU riser
Prerequisites
Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
About this task
About this task
CAUTION:
CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide
159