HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 236

Installing the processor Installing the processor
Prerequisites Prerequisites
Identify the processor and socket components .
Review the processor cautions .
Before you perform this procedure, make sure that you have the following items available:
T-20 Torx screwdriver or a torque screwdriver with T-20 drill bit
Thermal grease (spare part number: 777298-001)
About this task About this task
CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
Procedure Procedure
1. Install the processor:
a. Hold the processor by its carrier handle.
b. Slide the processor into the rail frame until it engages with a click sound.
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 236