HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 269

20. If removed, install the front bezel.
21. Make sure all firmware, including option cards and embedded devices, is updated to the same versions to ensure that the latest drivers
are being used.
22. Re-enter any Secure Boot keys that were previously added in the Secure Boot configuration.
23. Re-enter the server serial number and product ID, and configure the date and time settings .
Re-entering the server serial number and product ID Re-entering the server serial number and product ID
About this task About this task
After replacing the system board, re-enter the system serial number and product ID, and configure the date and time settings.
Procedure Procedure
1. Access the UEFI System Utilities. During POST, press F9 F9.
2. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options > Advanced
Service Options.
3. Select Serial Number, and then press Enter
The following warning appears:
The serial number is modified by qualified service personnel and must match the serial number
located on the chassis.
4. Click OK.
5. Type the serial number, and then press Enter
6. Select Product ID, and then press Enter
The following warning appears:
Product ID is modified only by qualified service personnel. This value must match the product
ID located on the chassis.
7. Type the product ID, and then press Enter
8. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Date and Time.
9. Configure the date and time settings:
Date (mm-dd-yyyy)—Enter the date in a month-day-year (mm-dd-yyyy) format.
Time (hh:mm:ss)—Enter the time in a 24-hour format (hh:mm:ss) format.
Hour Format—Select either a 12- or 24-hours format. (This menu is supported in Gen10 Plus and later servers.)
Time Format
Coordinated Universal Time (UTC) —Calculates the time stored in the hardware real-time clock (RTC) from the associated Time
Zone setting.
Local Time—Removes the use of the Time Zone setting. This option is useful for addressing interaction issues in Windows
operating systems set in legacy BIOS boot mode.
Time Zone—Select the time zone for the system.
Daylight Savings Time—Select whether to enable DST in the system time setting.
10. To confirm and save the settings, press F12
Enter.
Enter.
Enter.
Enter.
F12.
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 269