Programming The Overall Configuration Functions; Selecting The Video Standard; Adjusting The Horizontal Character Size; Resetting The 7700Sid-Cm To Its Factory Defaults - evertz 7700 Series Manual

Dtv frame analog source id decoder

Hide thumbs Also See for 7700 Series:

Table of Contents

7700 Series DTV Frame Manual

7700SID-CM Analog Source ID Decoder

The SYMBOLS menu item is used to select whether the ^ symbol will be shown in front of the time and

user bit displays of the VCG.

Select DISPLAY to display the VCG symbols.

Select BLANK to blank the VCG symbols.

5.6.

PROGRAMMING THE OVERALL CONFIGURATION FUNCTIONS

The CONFIGURATION drop down menu is used to select the video standard, set the horizontal size of the

characters, and reset the module to its factory defaults. The CONFIGURATION menu items are normally

required only during installation.

The VIDEO TYPE menu item is used to select the video standard of the program video. Changing the

video standard will affect the settings of the VITC LINE RANGE menu setting. Make sure that you re-

check this setting when you change the video standard.

Select AUTO if you want to have the 7700SID-CM auto detect PAL and NTSC video.

Select NTSC if you are using NTSC video.

Select PAL if you are using PAL video.

The HORIZ CHAR SIZE menu item is used to adjust the character width. Use the toggle switch to adjust

the right side of the raster.

The FACTORY RESET menu item is used to reset the 7700SID-CM to the factory default parameters.

Hold the toggle switch down while pressing the pushbutton to reset the 7700SID-CM to factory defaults.

The 7700SID-CM will perform a power-on configuration before returning to the normal operating mode.

Press the pushbutton without holding the toggle switch to return to the menu system without resetting the

module.

7700SID-CM-11

Revision 1.0

Table of Contents

7700sid-cm