Table of Contents
Advertisement
VIDEO TYPE
AUTO
NTSC
PAL
HORIZ CHAR SIZE
HORIZONTAL
CHAR SIZE = 10
! " TO ADJUST
OPERATING INSTRUCTIONS
Model 5950-SID VITC Reader / Source ID Decoder Manual
The following descriptions appear in the order they appear the menu.
Figure 3-6: CONFIGURATION Drop Down Menu
3.7.1. Selecting the Video Standard
The VIDEO TYPE menu item is used to select the video standard of the
program video. Changing the video standard will affect the settings of the
VITC LINE RANGE menu setting. Make sure that you re-check this setting
when you change the video standard.
Select AUTO if you want to have the 5950-SID auto detect PAL and NTSC
video.
Select NTSC if you are using NTSC video.
Select PAL if you are using PAL video.
3.7.2. Adjusting the Horizontal Character Size
The HORIZ CHAR SIZE menu item is used to adjust the character width.
Use the ! & " keys to adjust the right side of the raster.
CONFIGURATION
VIDEO TYPE
AUTO
NTSC
PAL
HORZ CHAR SIZE
HORIZONTAL
CHAR SIZE = 10
! OR " TO ADJUST
DISPLAY LEVEL
FRONT PANEL
BRIGHTNESS = 2
# OR $ TO ADJUST
FACTORY RESET
** WARNING **
THIS COMPLETELY
RESETS UNIT
USE TIME/UB + SELECT
TO PROCEED
Page 3-12
Advertisement
Table of Contents
