Selecting The Audio Source; Audio Freeze Mode (-A4 And -Aes Only) - evertz 7735CEM Manual

Audio source
Audio freeze mode
Audio delay
Audio buffer
Ch1 processing
Ch2 processing
Ch3 processing
Ch4 processing
Ch 1 gain
Ch 2 gain
Ch 3 gain
Ch 4 gain

7.4.1. Selecting the Audio Source

Audio
Audio Source
Group 1
Group 2
Group 3
Group 4
AES (-A4 and
–AES only)
7.4.2. Audio Freeze Mode (-A4 and –AES only)
Audio
Audio freeze
mode
pass
mute
Gray background indicate un-implemented or un-tested features
Selects the source of audio. It will either be the source group or external AES
signals.
Selects what action to take when video is gone.
Add/remove audio delay.
Monitor audio delay buffer state.
Configures audio routing and processing for channel 1.
Configures audio routing and processing for channel 2.
Configures audio routing and processing for channel 3.
Configures audio routing and processing for channel 4.
-A4: Channel 1 output level control.
-AES: Channel 1 gain control.
-A4: Channel 2 output level control.
-AES: Channel 2 gain control.
-A4: Channel 3 output level control.
-AES: Channel 3 gain control.
-A4: Channel 4 output level control.
-AES: Channel 4 gain control.
Up to 4 groups of audio may be embedded on SDI video. This control selects
the group ID of the de-multiplexed audio. In addition, the external AES source
may be selected.
Two selectable actions can take place when input video is removed; pass and
mute.
If it is desirable to maintain audio through the encoder (only valid with AES
inputs), then set this control to pass. When set to mute, the audio will
automatically be muted when video is removed.
Revision 1.1.1
7735CEM Composite Encoder with Monitoring
7700 MultiFrame Manual
7735CEM-17