Table of Contents
Advertisement
2410MD Monitoring Down Converter
4.
STATUS LED'S
MODULE OK
This Green LED will be On when the module is powered up and the processor is
functioning with operating limits.
SIGNAL PRESENT: This Green LED will be On when there is a supported video signal present at the
module input.
5.
USER CONTROLS
The 2410MD-HSN is equipped with a 4 position DIP switch, located on one end of the unit, to allow the
user to select various down converted output formats. On later units there is also a toggle switch and
pushbutton on the side of the units, which are used to top control an on screen display menu. (See
section 6.)
Table 5-1 gives an overview of the DIP switch functions. The On position is down or closest to the side of
the unit with the flanges.
5.1.
SELECTING THE OUTPUT VIDEO STANDARD
DIP switch 1 is used to set the downconverted output video standard. Refer to Table 5-2 to set the output
format. The 2410MD-HSN will insert extra fields of some frames to create a 3:2 or 24:25 pulldown on the
output video when 23.98 sF or 24 sF video is input. The relationship of the pulldown sequence to the
input video will be random. For other input formats, the 2410MD-HSN will insert or remove fields of some
frames to create the correct number of output frames. The frames that are inserted or removed will be
random.
2410MD-6
DIP Switch
Function
1
Output Video Standard
2
Downconverter Aspect Ratio Format
3
4
Output Pedestal
Table 5-1: DIP Switch Functions
Input
1080i/60
625i/50 (PAL)
1080i/59.94
INVALID OUTPUT
1080i/50
625i/50 (PAL)
1080p/25sF
625i/50 (PAL)
1080p/24sF
625i/50 (PAL)
1080p/23.98sF
INVALID OUTPUT
720p/60
625i/50 (PAL)
720p/59.94
INVALID OUTPUT
Table 5-2: Output Video Standard Switch Settings
DIP 1 ON
DIP 1 OFF
525i/59.94 (NTSC)
525i/59.94 (NTSC)
525i/59.94 (NTSC)
Revision 1.2.3
525i/60
525i/60
525i/60
525i/60
525i/60
Advertisement
Table of Contents
