2400 Series Fiber Converter Manual
2405OE-HD SMPTE 292M Re-Clocking Fiber to Electrical Converter
5.
USER CONTROLS
The 2405EO-HD is equipped with a 4 position DIP switch to allow the user to configure the module. The
On position is down, or closest to the printed circuit board. Table 5-1 gives an overview of the DIP switch
functions.
5.1.
SELECTING RECLOCK OR NON-RECLOCK MODE
DIP switch 1 determines whether the module will operate as a reclocking distribution amplifier with SMPTE
292M (1.5 Gb/s) video signals or as a non-reclocking distribution amplifier with other data rates as shown
in Table 5-2.
DIP 1
FUNCTION
Reclock
Off
(default)
On
Non-reclock
2405OE-HD-6
DIP Switch
Function
1
Reclock Mode Selection
2
Future Use
3
4
Table 5-1: DIP Switch Functions
DESCRIPTION
The 2405EO-HD will reclock 1.485 Gb/s video signals.
The 2405EO-HD will act as a non-reclocking distribution amplifier
for signals in the 19.4 Mb/s to 1.485 Gb/s frequency range.
Table 5-2: Reclock Mode Switch Setting
Revision 1.2