3.
HOW TO OPERATE THE SDI TIME CODE MASTER
The model 8010TM SDI Time Code Master combines the latest LSI technology with sophisticated
microcontroller firmware to provide a powerful, flexible Serial Digital Video Time Code Master. The
8010TM is a combination generator/reader for Linear Time Code (LTC) and Digital Vertical Interval
Time Code (D-VITC), and contains a high resolution character inserter which can burn the generator or
reader numbers directly into the digital program output as well as an optional analog monitoring output.
A 16 digit alphanumeric display can be quickly delegated to show the required data.
3.1.
AN OVERVIEW OF KEY AND DISPLAY FUNCTIONS
The display area consists of a 16 digit alphanumeric display, 8 LED status indicators and a 16
pushbutton keypad.
The keypad is used to control the front panel menu system, to set the generator time and user bits,
position the character display windows, and to provide control of the front panel display. When the
SHIFT key is held down, the meanings of some of the keys are modified, gaining quick access to a
wider variety of functions. (Throughout this manual SHIFT + indicates that you should hold down the
SHIFT key while pressing the second key.)
A front panel programming menu provides a quick and simple method of configuring the 8010TM for
your application. Sections 3.2 to 3.7.16 give detailed information on the specific operations required to
control the 8010TM.
3.1.1. The Setup Pushbutton Group
The Setup key group consists of the SELECT, SETUP and , , , keys and is used to navigate
the front panel programming menu system, and to position character windows.
SETUP:
Enters the Setup mode that is used to set up various modes of operation. Pressing
SETUP again while in this mode exits the Setup mode. (See also section 3.3)
SHIFT + SETUP: Enters the Engineering Setup mode that is used to set up various items that are
normally only required during installation.
SELECT:
When in the Setup mode the SELECT key is used to activate/deactivate sub-menus
from the drop down menu
When in the Setup mode, the arrow keys are used to move to various items
in the menu system. (See also section 3.3)
When in the VCG window select mode, the arrow keys are used to position the individual
character windows on the screen. (See also section 3.6.4.)
OPERATION
Figure 3-1: Model 8010TM Front Panel Layout
Revision 1.5.1
Model 8010TM SDI Time Code Master Manual
Page 3-1