The Setup Pushbutton Group - evertz 5010 SIE Instruction Manual

OPERATING INSTRUCTIONS

3.1.1. The Setup Pushbutton Group

VITC
CHAR
The Setup key group consists of the SELECT, SETUP and !, ", #, $
keys and is used to navigate the front panel programming menu system, to
position character windows and to enter the source ID message.
SETUP Enters the Setup mode which is used to set up various modes
of operation. Pressing SETUP again while in this mode exits
the Setup mode. (See also section 3.3.)
SHIFT + SETUP Enters the Source ID programming mode. (The front
panel display must be showing SRC ID before you can enter the
Source ID Programming mode).
program the source ID message that will be encoded into the
VITC and displayed in the Source ID character window.
Pressing SETUP in this mode exits the Source ID programming
mode and returns to normal operating mode without saving the
entered data. (See also section 3.7)
SELECT When in the Setup mode the SELECT key is used to
activate/deactivate sub menus from the drop down menu
When in the Source ID programming mode, the SELECT key is
used to accept the Source ID message that has been entered.
# $ ! " When in the Setup mode, the # $ ! " arrow keys are used to
move to various items in the menu system. (See also section
3.3.)
When in the Source ID programming mode, the ! & " arrow
keys are used to move between characters in the message and
the # & $ arrow keys are used to change the characters of the
message. (See also section 3.7.)
When in the VCG window select mode, the arrow keys are used
to position the individual character windows on the screen.
(See also section 3.8.1.)
When not in the Setup mode, Source ID programming mode or
the VCG window select mode, the arrow keys are used to
position all the character windows on the screen. (See also
section 3.8.2.)
Model 5010-SIE Source ID Encoder Manual
WINDOW SELECT SET-UP
CHAR
GEN
ON/OFF
POS
CHAR
In this mode the user can
Page 3-2