4.1.
AUDIO STATUS LEDS
Four LEDs located on the main board on the lower end of the module (near the card extractor) indicate
which audio groups are present in the input video. Audio group LED 1 is located closest to the center of
the module.
Audio Group
Colour
LED
1
Off
Green
2
Off
Green
3
Off
Green
4
Off
Green
On the sub board, the four LEDs located on the lower end of the module (near the card extractor) indicate
which discrete AES channels are present in the input video. Audio group LED 1 is located closest to the
center of the module.
Audio Group
Colour
LED
1
Off
Green
2
Off
Green
3
Off
Green
4
Off
Green
5.
CARD EDGE CONTROLS
The 7710XUC-HD modules are equipped with an eight-position DIP switch to allow the user to select
various functions. Figure 6 and Figure 7 show the locations of the DIP switch on the modules.
On the "-AES4" versions, there is a second set of DIP switches that are on the main
board. These switches have no functionality and should be left in factory settings.
All positions are assigned sequentially such that the DIP switch 1 is located at the top of the DIP switch
(farthest from the card ejector). Table 6 gives an overview of the DIP switch functions. Sections 5.1 to 5.2
describe the DIP switch functions. The on (closed) position is down, or closest to the printed circuit board.
7710XUC-HD HD Format Up/Down/Cross Converter
No group 1 present on input video
Group 1 present on input video
No group 2 present on input video
Group 2 present on input video
No group 3 present on input video
Group 3 present on input video
No group 4 present on input video
Group 4 present on input video
Table 4: Audio Group Status LEDs
AES Input Status
No signal on AES 1 input
Audio signal present on AES 1 input
No signal on AES 2 input
Audio signal present on AES 2 input
No signal on AES 3 input
Audio signal present on AES 3 input
No signal on AES 4 input
Audio signal present on AES 4 input
Table 5: AES Input Status LEDs
Revision 1.0
7700 MultiFrame Manual
Audio Group Status
7710XUC-HD
-13