Table of Contents
Advertisement
3.7.4. Selecting and Positioning the Individual Character Inserter Windows
In VTR mode, separately positionable character windows displaying Generator Time or Source
ID/Status (user bits) are available. Although the Source ID and Status windows move together, they
can be independently turned on and off. In RDR LVS mode there are two additional character windows
to display the LVS and CTL information. There are also separate windows for the LTC and VITC
reader time and user bits. The four arrow keys ( ,
The CHAR GEN ON/OFF key selects whether the video character generator (VCG) keyer is on or off.
The use of these keys in combination with the CHAR GEN WINDOW key selects which windows are
displayed and their position on the screen.
Press CHAR GEN WINDOW to enable the window select mode. All the character windows will appear
on the screen with the window for the Time highlighted. Use the arrow keys ( ,
the Time window on the screen. Use the CHAR GEN ON/OFF key to turn the Time window on or off.
Press the CHAR GEN WINDOW key to highlight the Source ID window. Use the CHAR GEN ON/OFF
key to turn the Source ID window on or off and the arrow keys to move it to the desired location. Press
the WINDOW key again to select the next window and the arrow keys to move it to the desired location
and so on. The 8010-SIE returns to the normal VCG display mode after the last window has been
selected. Some windows are only available when the 8010-SIE is in RDR LVS mode.
Note that the Source ID and Status windows always move together.
3.7.5. Positioning the Overall Character Display
In the normal VCG display mode, when none of the windows are highlighted, the arrow keys ( ,
) move all the displayed windows by the same relative amount. For example, to move the time and
source ID/status windows both down by one line press the
3.7.6. Character Generator On/ Off Controls
There are several factors that control whether the character generator will be turned on or off. In order
of priority these are:
•
The CHAR GEN ON/OFF key on the front panel alternately turns the digital and analog characters
on and off.
•
The VCG Keyer On/Off remote control input on the rear panel alternately turns the digital and
analog characters on and off. This input has equal priority with the front panel CHAR GEN ON/OFF
key.
•
The individual windows can be turned off using the CHAR GEN ON/OFF key in window select
mode.
OPERATION
Model 8010-SIE Digital Source ID Encoder Manual
,
,
) control the position of all the windows.
key.
Revision 2.2
,
,
) to position
,
,
Page 3-17
Advertisement
Table of Contents
