Character Generator Controls; 1Selecting And Positioning The Individual Character Windows; Selecting And Positioning The Individual Character Windows - evertz 4025 Instruction Manual

3.12

CHARACTER GENERATOR CONTROLS

OPERATION
When the KKODE JAM mode is set to ALWAYS, the error
should be 00 when the telecine is in Play, and the film has
continuous edge numbers.
when a splice is encountered. When the telecine is in shuttle,
non-zero values are normal. If the ERR value exceeds 30 film
frames, the edge numbers will be updated from the barcode
reader values. A KJ will appear at the right of the status line
when the bi-phase based numbers are updated with a different
barcode value.
PULL Indicates the film to video pulldown relationship in 24 FPS
NTSC transfers. This value is measured at the first film frame of
each foot, in video field 2.
The 2/3 sequence creates four types of picture frames, called A,
B, C, and D. The 'A' frame is always a f1/f2 picture, the 'B'
frame is a f1/f2/f1 picture, the 'C' frames is a f2/f1 picture, and
the 'D' frames is a f2/f1/f2 picture. See Figure 0-15.
This indicator shows whether film frame 00 of each foot is A, B,
C, or D type. An underscore (_) shows whether this video frame
contains a complete picture. The indicators used are show in
the following table:
Indicator
A
B
B
C
D
D
During 30 frame per second transfers in NTSC, and 25 frame
per second transfers in PAL, the PULL status is blanked.
KJ Indicates when the KeyKode Reader actually updates the bi-
phase based numbers.
The four arrow keys
MODE keys, control the display of information in the character generator.
The generator time, film key number (KeyKode number), auxiliary reader
time (RDR 2 time) and absolute frames data may be displayed in separate
positionable windows. Each window may be positioned anywhere on the
raster, or turned off. One of three character sizes and four character styles
apply to all the windows, and are selectable using the CONFIG drop down
menu of the Format menu.

3.12.1 Selecting and Positioning the Individual Character Windows

Press the CHAR GEN MODE key to enable the VCG window select mode.
All four windows will appear on the character screen, with the window for
Model 4025 Film Footage Encoder Manual
It will be non-zero momentarily
Type of Frame Indicated
A Frame
B Frame first 2 video fields
B Frame third video field
C Frame
D Frame first video field
D Frame last 2 video fields
, , , and , and the CHAR GEN ON / OFF and
Page 58