Table of Contents
Advertisement
2410MD Monitoring Down Converter
6.
CONFIGURING THE 2410MD-HSN USING THE ON SCREEN MENU
An On screen menu (OSD) is used to configure several of the 2410MD-HSN's parameters. The three
position, return to center, toggle switch and momentary pushbutton located on the side of the unit are used
to navigate the OSD setup menus and configure the cards various controls.
Earlier units are not fitted with the toggle switch and pushbutton and do not have an
On Screen menu. On these units, DIP switches 2 and 3 both set to the On position is
an invalid switch setting. The remainder of section 6 is not applicable.
To enter the OSD menu system, set DIP switches 2 and 3 to the On (Closed) position. Then press the
pushbutton. This will bring you to the main setup menu where you can use the toggle switch to move up
and down the list of available sub-menus. An arrow (>) moves up and down the left hand side of the menu
items to indicate which item you are currently choosing. Once the arrow is on the desired item, press the
pushbutton to select the next menu.
On all menus, there is a selectable item Done. Selecting Done will exit the OSD menu and return the
2410MD-HSN to the normal operating mode.
Use the toggle switch to move up or down to the desired parameter and press the pushbutton. The arrow
will move to the right hand side (<) indicating that you can now adjust the parameter. Using the toggle
switch, adjust the parameter to its desired value.
When you have stopped at the desired value, depress the pushbutton. This will update the parameter with
the selected value and move the arrow back to the left side of the parameter list. Continue selecting and
adjusting other parameters or use the Done command to exit the OSD menu.
6.1.
TOP LEVEL MENU STRUCTURE
The following is a brief description of the top level of the menu tree that appears when you enter the On
screen menu. Selecting one of these items will take you down into the next menu level.
Marker Type
Marker Opacity
Aspect Ratio
Done
2410MD-8
Sets the type of on screen marker.
Sets the opacity of the on screen markers.
Sets the aspect ratio of the downconverted output.
Exit On Screen Menu System.
Revision 1.2.3
Advertisement
Table of Contents
