Table of Contents
Advertisement
7700 MultiFrame Manual
7710UC-KF HD Key/Fill Up Converter
6.
ON SCREEN MENUS
6.1.
NAGIVATING THE ON SCREEN MENU SYSTEM
A toggle switch and pushbutton allow card edge navigation of a set of on-screen menus used to configure
the card. To enter the on-screen menu system press the pushbutton. This will bring you to the main
Setup menu where you can use the toggle switch to move up and down the list of available sub menus.
An arrow (
) moves up and down the left hand side of the menu items to indicate which item you are
currently choosing. Once the arrow is on the desired item, press the pushbutton to select the next menu
level.
On all menus, there are two extra selectable items: Back and Exit. Selecting Back will take you to the
previous menu (the one that was used to get into the current menu) while Exit will return the display to its
normal operating mode. On the main menu, BACK and EXIT will both take you to the normal operating
mode.
Once in a sub menu, there may be another menu layer, or there may be a list of parameters to adjust. If
there is another set of menu choices, use the toggle switch to select the desired menu item and press the
pushbutton.
To adjust any parameter, use the toggle switch to move up or down to the desired parameter and press
the pushbutton. The arrow will move to the right hand side of the line (
adjust the parameter. Using the toggle switch, adjust the parameter to its desired value. If the parameter
is a numerical value, the number will increase if you lift the toggle switch and decrease if you push down
on the toggle switch.
When you have stopped at the desired value, depress the pushbutton. This will update the parameter to
the selected value and move the arrow back to the left side of the parameter list (
and adjusting other parameters or use the BACK or EXIT commands.
6.2.
ON SCREEN DISPLAY – MAIN MENU
The OSD menu is arranged in a layered structure that groups similar configuration items together. The
following section gives a brief description of the first level of menus that appear when you enter the OSD
screens. Selecting one of these items will take you to the next menu level. Sections 6.3 to 6.6 provide
detailed descriptions of each of the sub menus. The tables in sections 6.3 to 6.6 are arranged in an
indented structure to indicate the path taken to reach the control. Menu items or parameters that are
underlined indicate the factory default values. Note: Some menu items don't appear on all models.
Video
Scaler
Video Proc
Utilities
7710UC-KF-8
Sets the frame rate, input and output video standards, timing reference
select and timing offset for the video output
Configuration of the main output picture aspect ratio presets. Configuration
of the main scaler filter sharpness, panel colors, user cropping and output
picture window size.
Control the main video proc amp functions
Card preset management and various debug and maintenance features.
Revision 0.2
) indicating that you can now
). Continue selecting
Advertisement
Table of Contents
