On Screen Menus; Nagivating The On Screen Menu System - evertz 7700 Manual

Video composite encoder and audio dac with softswitch

Hide thumbs Also See for 7700:

Table of Contents

ON SCREEN MENUS

7.1.

A toggle switch and pushbutton allow card edge navigation of a set of on-screen menus used to configure

the card. When configuring multiple cards it is useful to copy board configurations from one board to

another using the ConfigSet utility provided with the user's card. Please view the ConfigSet information in

section 8 of this manual.

To enter the menu system, simultaneously push and hold the toggle switch up, and press and hold the

push-button. After about 5 seconds, the main menu appears. The user can now use the toggle switch to

move up and down the list of available sub-menus. An arrow (>) moves up and down the left hand side of

the menu items to indicate which item the user is currently choosing. Once the arrow is on the desired

item, press the pushbutton to select the next menu level.

On all menus, there are two extra selectable items: Back and Exit. Selecting Back will take the user to the

previous menu (the one that was used to get into the current menu) while Exit will return the display to its

normal operating mode. On the main menu, BACK and EXIT will both navigate to the normal operating

mode.

Once in a sub-menu, there may be another menu layer, or there may be a list of parameters to adjust. If

there is another set of menu options, use the toggle switch to select the desired menu item and press the

pushbutton.

To adjust any parameter, use the toggle switch to move up or down to the desired parameter and press

the pushbutton. The arrow will move to the right hand side of the line (<) indicating that the user can now

adjust the parameter. Using the toggle switch, adjust the parameter to the desired value. If the parameter

is a numerical value, the number will increase if the toggle switch is lifted and decrease if the toggle switch

is pushed down. If the parameter contains a list of options, the user can cycle through the list by pressing

the toggle switch in either direction.

When the desired value is reached, depress the pushbutton. This will update the parameter to the

selected value and move the arrow back to the left side of the parameter list (>). Continue selecting and

adjusting other parameters or use the BACK or EXIT commands.

7735AVC-LB Video Composite Encoder and Audio DAC with SoftSwitch

Revision 1.6

7700 MultiFrame Manual

7735AVC-LB - 15

Table of Contents

7735avc-lb