Table of Contents
Advertisement
OPERATION
Model 5550 Universal Film Data Decoder Manual
3.1.3. Front Panel Displays
The DISPLAY key is used to select what data is being displayed on the
front panel.
Press it repeatedly to select another display.
SHIFT + DISPLAY key to access an extended list of displays. Pressing
DISPLAY while showing an extended display will revert to the KeyKode
display. The display items relating to time code (marked with an asterisk *)
are only available when a time code capable head is connected and the
respective time code mode is selected.
At this time the normal displays available are:
KJ123456 6789+00
TM = 12:45:30:00
UB = 12 34 56 78
UB2= 12 34 56 78
UB3= 12 34 56 78
MFR= 02 TYPE= 96
At this time the extended displays available are:
p: UV55DB 980626
F: UV55D4 980812
KK ASYM'Y = +00%
TC ASYM'Y = +00%
TC VAL READ= 00%
MATRIX POS'N= 00
MATRIX SIZE = 00
MATRIX LEN
= 00
KK16 SENSOR= 210
TC16 SENSOR= 210
KeyKode display (KeyKode LED is ON)
Film Timecode display (Timecode LED is ON) *
Film Timecode User Bits (User Bits LED is ON) *
Film Timecode Auxiliary User Bits group 2
(User Bits LED is ON) *
Film Timecode Auxiliary User Bits group 3
(User Bits LED is ON) *
KeyKode manufacturer and Film type codes
Figure 3-2: Normal Displays
EPROM Firmware version
Flash Firmware version
KeyKode bar/space asymmetry
Time code bar/space or matrix dot asymmetry *
Time code valid reads *
Time code matrix position *
Time code matrix size *
Time code matrix length *
KeyKode sensor value with no film loaded
Time code sensor value with no film loaded
Figure 3-3: Extended Displays
Press the
Page 3-3
Advertisement
Table of Contents
