Table of Contents
Advertisement
12-36 Cabinet maintenance operations
Procedure 12-8 (continued)
Connecting emergency standby power - attached ac power pedestal option
Step
8
9
10
11
12
13
AccessNode 323-3001-210 Issue 1.0
Action
Power up the emergency generator.
Allow the generator to stabilize for at least five minutes (follow local practices).
Turn ON the 60 A emergency circuit breaker located on the top center access
panel.
Actuate the knife-switch lever to the BOTTOM EMERGENCY power position.
Release the door restraining rod and close the ac compartment door.
Emergency standby power is now connected.
—continued—
Advertisement
Table of Contents
