Table of Contents
Advertisement
6-38 Routing and terminating the VF cables
Procedure 6-8 (continued)
Connecting the outside plant cable pairs to 710 or 3M MS2 DPM connectors without
cross-connect
Step
4
5
6
Figure 6-18
Tie off each binder group to Its appropriate connector
AccessNode 323-3001-210 Issue 1.0
Action
Tie off each binder group with its appropriate connector to the ladder
supports. (see Figure 6-18).
Wrap the ends with vinyl tape to keep the binder groups organized until you
are ready to splice.
Attach the splice connection tool.
—continued—
Tie wrap binders to
appropriate connector
Advertisement
Table of Contents
