Nortel SONET AccessNode 800A Series Manual page 167

Procedure 6-8 (continued)
Connecting the outside plant cable pairs to 710 or 3M MS2 DPM connectors without
cross-connect
Step
11
12
13
14
15
16
17
AccessNode Series 800A Outside Plant Cabinet Installation 323-3001-210 Issue 1.0
Action
Arrange cable loops in an orderly manner on the inside left wall ladder
supports.
Tie wrap spliced connectors to the horizontal ladders.
Secure spliced groups to the ladder supports with cable ties (see Figure 6-19
on page 6-42 and Figure 6-20 on page 6-43).
Spare, form, and tie wrap any unused pairs for future use (see Figure 6-21 on
page 6-44).
Plug the VF cable entry holes with epoxy or equivalent compound.
Remove the connection tool.
Close the termination compartment door.
—continued—
Routing and terminating the VF cables 6-41