Nortel CS 1000M HG Manual

Nortel CS 1000M HG Manual

Fiber remote multi-ipe interface fundamentals
Table of Contents

Advertisement

Quick Links

Nortel Communication Server 1000
Fiber Remote Multi-IPE Interface
Fundamentals
NN43021-556
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CS 1000M HG and is the answer not in the manual?

Questions and answers

Summary of Contents for Nortel CS 1000M HG

  • Page 1 Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556...
  • Page 2 Users must take full responsibility for their applications of any products specified in this document. The information in this document is proprietary to Nortel Networks. Nortel, the Nortel Logo, the Globemark, SL-1, Meridian 1, and Succession are trademarks of Nortel Networks. All other trademarks are the property of their respective owners.
  • Page 3 Fiber Remote Multi-IPE Interface: Description, Installation, and Maintenance (553-3001-022). Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 4 4 Revision history Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 5: Table Of Contents

    Checking the system 106 Setting up test conditions 106 Performing acceptance testing 107 Remote IPE maintenance Contents 115 Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 6 Interface at the Remote IPE site 88 Procedure 27 Connecting the external alarm cable at the remote site 89 Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 7 Removing and replacing the card in the Fiber Remote Multi-IPE Interface unit 148 Procedure 51 Reinstalling covers 149 Procedure 52 Packing and shipping defective cards 149 Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 8 8 Contents Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 9: About This Document

    About this document This document is a global document. Contact your system supplier or your Nortel representative to verify that the hardware and software described are supported in your area. Subject This Nortel technical publication (NTP) provides information specific to the implementation of fiber-optic links that connect a local system to multiple...
  • Page 10: Intended Audience

    System or Meridian 1 Large System. Conventions Terminology The following systems are referred to generically as "Large System": • Communication Server 1000M Half Group (CS 1000M HG) • Communication Server 1000M Single Group (CS 1000M SG) • Communication Server 1000M Multi Group (CS 1000M MG) •...
  • Page 11: Ntp Feedback

    However, if you feel there are errors or omissions in this document, your feedback is welcome. Send comments by e-mail to gntsdoc@nortel.com or open a problem report through the normal procedures. Please provide as much information as possible including the NTP number, standard version and date of the document, as well as the page, problem description, and any supporting documentation and capture files.
  • Page 12 12 About this document Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 13: Product Description

    fiber-optic links between the network functions in the local system and the peripheral controller functions in the Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 14: System Description

    Multi-IPE Interface units are connected by a fiber-optic link at a distance of up to 15 miles over a single-mode optical fiber. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 15 J1 and the Remote IPE site with the superloop extended from the faceplate connector J2 at the same time. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 16 NT8D01BC #1 per other superloop Note: NT8D01BC Controller -4 replaces both NT8D01AC Controller-4 and NT8D01DC Controller-2 for new installations. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 17 Multi-IPE Interface units as shown in Figure 1 "Local system to Remote IPE connection over the fiber-optic link" (page 15). Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 18 24-pin Centronics connector to a Fiber Remote E Interface Cable Multi-IPE Interface unit SUPERLOOP 37-pin D Shell connector. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 19 A 6-foot cable that connects Superloop Network card J1 or Network to I/O J2 faceplate connectors to the network I/O panel. Panel Cable Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 20 Fiber Remote Multi-IPE Interface units. Figure 2 Local system to Remote IPE connection over fiber-optic links Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 21 The motherboard can then be accessed to install the daughterboard or to set configuration switches. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 22 SDI port, the MMI terminal, the modem, the external alarms, and the power. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 23 IPE. It can be connected at the local and at the remote site. DB-9 male Connects to external alarm devices. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 24 fiber-optic link, the maximum distance is approximately 15 miles. The actual distance depends on the quality of the fiber-optic cable and cable splices. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 25 I/O panel. This connector is used as the MMI terminal port at both the local and the remote sites. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 26 Remote Multi-IPE Interface unit can then be accessed by logging in again. The Fiber Remote Multi-IPE Interface supports the maintenance port transmission speed of 2400 baud. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 27 Fiber Remote Multi-IPE Interface units are co-located at the local site, they are daisy-chained and only one Fiber Remote Multi-IPE Interface Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 28 first be software disabled and then tested while the other superloops are carrying traffic. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 29 fiber-optic link detects an alarm condition. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 30 The LED will also be lit if a service-effecting off-line diagnostic test is in progress. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 31: Engineering Guidelines

    If a non-blocking traffic condition is required, the Remote IPE module requires a minimum of three superloops. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 32 The fiber-optic cable attenuation depends on the type of cable selected. The manufacturer’s data sheet provides parameter values, which Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 33 fiber-optic link where the signal loss is less than 15 dB for a given transmission rate over a single-mode fiber and less than 10 dB for the multi-mode fiber. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 34 Assume a 9 km length of fiber made from nine 1 km lengths of cable with eight splices in the cable (one splice every 1 km). Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 35 = 12.5dB + 2.4 dB = 14.9 dB Safety margin = 15 dB - 14.9 dB = 0.1 dB Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 36 0 to 50 C (32 to 122 F) Relative humidity 5% to 95% noncondensing Altitude 3,048 meters (10,000 feet) max Storage Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 37 Remote IPE column. This source is usually available if the system is DC-powered or has a DC backup power source. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 38 38 Product description Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 39: Installation And Configuration

    Refer to Table 2 in the Product Description section for Remote IPE components part numbers and their description. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 40 6. At the remote site, install the Remote IPE equipment. Refer to the following: • "Installing the internal cables to the Remote IPE module" (page 77) Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 41: Installation Overview

    Fiber Remote Multi-IPE Interface units and the Remote IPEs. Pre-installation Pre-installation procedures include: • preparing the site Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 42: Preinstallation Preparation

    Remote IPE site Preinstallation preparation Preinstallation preparation consists of the following: • preparing the site • unpacking and inspecting components Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 43 1.4 inches (3.5 cm) when handled or installed. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 44 Multi-IPE Interface units and, if it can, at what distance between the local system and the Remote IPE. Consult the Nortel distributor to learn how to verify that the existing fiber-optic link is suitable for the Fiber Remote IPE application and what equipment to use to do so.
  • Page 45 The system type determines in what type of module the card will be housed. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 46: Fiber-Optic Equipment Installation

    Superloop Network cards selected to support the Remote IPE sites over a fiber-optic link. All that is necessary is to connect the Fiber Remote Multi-IPE Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 47 The LED should blink three times and then stay ON until enabled by software. When enabled by software, the LED turns OFF permanently, if operational. —End— Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 48 Fiber Remote Multi-IPE Interface using S1 and S2 dip-switches • install redundant fiber-optic connectors, if required Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 49 Reserved for future use S2 Positions 3–8 Note: Switch position: ON= Up and OFF= Down for S1 and S2 switches. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 50 S1 Pos 3 S1 Pos 4 S1 Pos 5 S1 Pos 6 S1 Pos 7 S1 Pos 8 Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 51 S1 Pos 3 S1 Pos 4 S1 Pos 5 S1 Pos 6 S1 Pos 7 S1 Pos 8 Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 52 S1 Pos 3 S1 Pos 4 S1 Pos 5 S1 Pos 6 S1 Pos 7 S1 Pos 8 Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 53 Fiber Remote Multi-IPE Interface faceplate. Configure the Fiber Remote Multi-IPE Interface using the S1 dip-switch. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 54 To specify the physical location of the Fiber Remote Multi-IPE Interface units, follow the steps in Procedure 4 "Setting the S2 dip-switch" (page 55). Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 55 Insert the fiber-optic ST-type connectors into the openings on the faceplate and install the daughterboard onto the four standoffs. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 56 Fiber Remote Multi-IPE Interface unit. Figure 7 Installing the redundant fiber-optic link option —End— Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 57 Install the Fiber Remote Multi-IPE Interface units into the shelf slots by sliding them in from the front of the shelf. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 58 Fiber Remote Multi-IPE Interface units on the wall and into a rack-mounted shelf. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 59 Procedure 7 "Installing the Fiber Remote Multi-IPE Interface unit onto the wall" (page 60). Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 60 Figure 9 "Wall-mounting the Fiber Remote Multi-IPE Interface unit" (page illustrates the installation of the Fiber Remote Multi-IPE Interface unit onto the wall. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 61 Note: Use the superloop connection plan that you completed based on the traffic blocking criteria for Remote IPE segments and Table 2 "Superloop connection configurations" (page 16). Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 62 Interface unit to the system monitor at the local site, follow the steps in Procedure 9 "Connecting a single Fiber Remote Multi-IPE Interface to the system monitor" (page 63). Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 63 Plug the other end of the NT8D46AL cable 6-pin modular plug into the second Fiber Remote Multi-IPE Interface unit 6-pin modular jack XSM IN (J5). Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 64 Figure 10 "System monitor daisy-chain connections at the local site" (page illustrates the system monitor daisy-chain connections for multiple Fiber Remote Multi-IPE Interface units at the local site. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 65 Plug the NT7R66BA MMI Cable DB-9 female connector into the DB-9 male MAINT connector on the Fiber Remote Multi-IPE Interface unit. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 66 NT7R66AA SDI Cable Kit, which consists of a 10-foot DB-9 male to DB-25 male cable and a DB-25F/DB-25F adapter. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 67 Note: For maintenance convenience, use the daisy-chain addressing in descending order from the MMI terminal side to the host SDI side. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 68 Fiber Remote Multi-IPE Interface unit #3 and the modem. Secure cables with tie-wraps as appropriate. —End— Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 69: Figure 11

    Note: Label optical fibers in the fiber-optic cable next to the ST optical connectors. Label one fiber XMIT A and its pair RCV A at one end of Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 70: Procedure 16

    These alarm outputs indicate external alarm contact closures at the Remote IPE site and the failure of the fiber-optic link. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 71 Observe the wire color codes and their corresponding pin assignments at the connector when wiring the external alarm devices to the cable. —End— Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 72 This green LED should turn ON and stay lit as long as the unit is powered. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 73 (page 74) shows the power connection of the Fiber Remote Multi-IPE Interface unit to the local DC power source. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 74 Figure 13 "DC system power source connection to the Fiber Remote Multi-IPE Interface unit" (page 76) for an illustration of this power source connection. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 75: Unit

    Multi-IPE Interface unit" (page 76) illustrates the POWER connector on the I/O panel of the Fiber Remote Multi-IPE Interface unit. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 76: Remote Ipe Installation

    Communication Server 1000M and Meridian 1 Large System Installation and Commissioning (NN43011-310). It describes how to install Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 77 SL2, and SL3 backplane connectors, if these are required. Replace the back cover on the Remote IPE module. —End— Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 78 Reserved for future use S2 Positions Note: Switch position: ON= Up and OFF= Down for S1 and S2 switches. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 79 S1 Pos 3 S1 Pos 4 S1 Pos 5 S1 Pos 6 S1 Pos 7 S1 Pos 8 Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 80 S1 Pos 3 S1 Pos 4 S1 Pos 5 S1 Pos 6 S1 Pos 7 S1 Pos 8 Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 81 Interface units, which can be installed into the rack-mounted shelf. To perform this installation, refer to "Installing multiple Fiber Remote Multi-IPE Interface units into the shelf" (page 57). Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 82 Fasten the top of the wall mount bracket to the wall with the provided screw. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 83 Fiber Remote Multi-IPE Interface unit I/O panel. Repeat steps 3 and 4 for each superloop to be connected. —End— Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 84 LD 37 to ensure that every local and remote system monitor is responding to the master system monitor. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 85: To Connect The Mmi Terminal To The Fiber Remote Multi-Ipe Interface

    DB-25 female connector on the MMI terminal. If the MMI terminal does not have a DB-25 connector or is a different gender, use an appropriate adapter. —End— Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 86 Plug the other end of the second A0634497 Maintenance Interface cable into the SDI connector on the Fiber Remote Multi-IPE Interface unit #3. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 87: Plug The Nt7R66Ba Mmi Cable Db-9 Female Connector Into The

    XMIT A at one end should be labeled RCV A at the other end of the link Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 88 Fiber Remote Multi-IPE Interface unit and the external alarm devices. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 89 To install and connect the Power Converter to the Fiber Remote Multi-IPE Interface unit at the remote site, refer to "Connecting the AC/DC Power Converter" (page 74). Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 90: Configuring The Equipment

    Remote IPE Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 91 Prints remote EPE loop numbers configured in xxx... LD 17 xxx xxx SUPL Lists all local Superloop Network card superloop xxx... numbers Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 92 Superloop card side for the Superloop Network card, where L (left) is default position. XPEC 1–95 Peripheral Controller card previously equipped. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 93 To delete the configuration record for the Remote IPE module Change configuration record TYPE Remote IPE XPEC Delete configuration record for the Peripheral Controller 2 Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 94: Configuring The Fiber Remote Multi-Ipe Interface Unit

    Multi-IPE Interface unit as follows: • speed: 2400 bps • character width: 7 bits • parity bit: mark • stop bit: 1 Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 95 TTY. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 96 - disabled • character width - 7 bits • parity bit - mark • stop bit - one Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 97: Configuring The Modem Parameters

    Disable result codes. If the modem has a dip-switch, set switch position #3 to the UP position. Otherwise, type ATQ1&W0&Y0<cr>. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 98 To configure the Fiber Remote Multi-IPE Interface using the MMI terminal, log on, enter the password, and use appropriate MMI commands. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 99 Fiber Remote Multi-IPE Interface configuration parameters can be displayed to decide which parameters should be changed to meet the system requirements. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 100 10-9 or 1 error in 1,000,000,000 bits or 3 error bits/min, and E-10 represents 10-10 or 1 error in 10,000,000,000 bits or 1error bits/min. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 101 D C [P] Display configuration [Pause]. Displays current near-end configuration such as time, date, name, and link bit error threshold. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 102 Test duration can be set from 1 to 98 minutes. By entering 0, the tests run one time. To stop testing, enter STOP. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 103 1 to 98 minutes. By entering 0, the tests run one time. To stop testing, enter STOP. Terminates the terminal connection. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 104 104 Installation and configuration Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 105: Remote Ipe Acceptance Testing

    Acceptance testing verifies the operation of local system functions and features at the remote site equipped with Fiber Remote Multi-IPE Interface units and the Remote IPE. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 106: Checking The System

    It may be able possible to use the system as configured at the site according to the customer requirements and not have to modify the configuration to perform the acceptance testing. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 107: Performing Acceptance Testing

    Note: The local system treats Remote IPE subscriber loops as local loops; therefore, it is only necessary to dial the extension number to access that station. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 108: Performing A Call Hold/Call Retrieve Test

    Answer the incoming call and place it on hold. Retrieve the call first held. Complete the call and hang up. Retrieve the second call on hold. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 109: Checking The Mmi Terminal Operation

    Check the log file content by executing the D A D to print far-end log messages from the file starting with the oldest message. Examine the messages. —End— Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 110: Performing A Manual Switch-Over

    Reconnect the link ST optical connector into the XMIT B connector on the Fiber Remote Multi-IPE Interface faceplate. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 111: Performing A Forced Switch-Over

    Multi-IPE Interface units after the loss of power at one end. To perform this test, follow the steps in Procedure 34 "Perform a fault recovery test" (page 112). Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 112: Perform A Fault Recovery Test

    The status message can be XM1000 to indicate a problem and PLL is unlocked. Find the problem and reestablish the PLL lock. —End— Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 113 For more information on traffic reports, refer to the Traffic control program LD 02 in Software Input Output Administration (NN43001-611) and Traffic Measurement Format and Output Reference (NN43001-750. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 114 114 Remote IPE acceptance testing Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 115: Remote Ipe Maintenance

    A problem may have more than one cause. To isolate the cause, a knowledge of Remote IPE operation is required. This information can be found in "Product description" (page 13). Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 116 (high power visible light source) • OTDR (Optical Time Domain Reflectometer), rent for occasional use Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 117: Troubleshooting The Fiber-Optic Link

    If the power is low, the problem is in the transmitter. If the transmitter output power level is within specifications, the fiber-optic link has too much signal attenuation. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 118 LED on the corresponding Fiber Remote Multi-IPE Interface unit Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 119 • power supply in the modules fails • system temperature exceeds limits because of blower or fan failure Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 120 For a list of system messages, refer to Software Input Output Administration (NN43001-611). Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 121 Specify these tests in Background Signaling and Switching program LD 45. BSD messages indicate the status of the network continuity tests and other network problems. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 122 Multi-IPE Interface to test the Fiber Remote Multi-IPE Interface unit, the superloops connected to the unit, and the fiber-optic link. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 123 Display status distant. Displays far-end superloop and fiber-optic link status. H or ? Help. Displays the Help screen. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 124 Test duration can be set from 1 to 98 minutes. By entering 0, the tests run one time. To stop testing enter STOP. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 125 TEST FIBER (T FI). Tests near-end Fiber Remote Multi-IPE Interface, the fiber-optic link, and the far-end Fiber Remote Multi-IPE Interface. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 126: Isolating Remote Ipe Faults

    Fiber Remote Multi-IPE Interface LEDs indicating no transmission on the fiber-optic link. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 127 Table 20 "Remote IPE equipment problems" (page 128) that are related to problems with a previously operating Remote IPE. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 128 Multi-IPE Interface. fiber-optic link" (page 138) Procedure 45 "Testing the fiber-optic link" (page 141) to test the fiber-optic link. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 129 To isolate and correct problems with the Superloop Network card, follow the procedures below. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 130: Checking The Status Of The Superloop Network Card

    CTYF L1 L2É = loop specified in STAT command cannot receive speech from one or more loops or there is a possible continuity Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 131: Performing The Superloop Network Card Self-Test

    If the Superloop Network card passed the self-test, but the problem persists, the loop or other cards that interface with the Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 132: Checking The Peripheral Controller Card Tracking Status

    Network and Signaling Diagnostic Program LD 30. To obtain the Peripheral Controller card tracking status: Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 133: Performing The Peripheral Controller Card Self-Test

    Log in on the maintenance terminal as Host SDI by entering the password HOST from the MMI mode. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 134 These commands provide current equipment status, perform superloop and link testing, check equipment performance, print messages from log files, and clear alarm and error logs. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 135: Displaying Alarm And Error Logs To Check The Performance History

    Clear the near-end (local) alarm log by executing the C AL (CLEAR ALARM) and the far-end (remote) by executing the C AL D (CLEAR ALARM DISTANT) command. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 136: Checking The Superloop And The Fiber-Optic Link Status

    The response is displayed on the screen and shows the software version, present time and date, alarm status, error rate, and the superloop link status. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 137 (TEST ALL) T A command. This test interferes with normal traffic; therefore all superloops should be disabled. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 138: Testing The Superloops And The Fiber-Optic Link

    DS-30A Clock Test Completed Test Fiber A Micro Link Up. Test Using Distant Loopback Fiber Message Test Passed Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 139: Testing The Superloop

    Place the MMI terminal into the MMI mode by entering @@@. To test the disabled near-end superloop, execute the T SL command at the MMI terminal. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 140 This test interferes with normal traffic; therefore, all superloops should be disabled. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 141: Testing The Fiber-Optic Link

    Fiber Remote Multi-IPE Interface. Check the fiber-optic cables and optical connectors to verify that they are properly connected. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 142 If the problem is finally corrected, execute the T A command as described in Procedure 43 "Testing the superloops and the Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 143: Unpacking Replacement Equipment

    Install cards. When handling the cards, hold them by their nonconducting edges to prevent damage caused by static discharge. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 144: Removing And Replacing A Superloop Network Card

    Set the ENL/DIS switch on the Superloop Network card to ENL. The Superloop Network card automatically starts the self-test. Observe the red LED on the front panel during self-test. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 145: Removing And Replacing A Peripheral Controller Card

    Pull the card out of the Remote IPE module and place it in an antistatic bag away from the work area. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 146: Removing And Replacing A Complete Fiber Remote Multi-Ipe Interface Unit

    Removing and replacing a complete Fiber Remote Multi-IPE Interface unit Step Action Log in on the TTY or the MMI maintenance terminal. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 147 Multi-IPE Interface unit" (page 148) replaces just the motherboard and faceplate combination. The enclosure remains installed and connected. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 148: Removing And Replacing The Card In The Fiber Remote Multi-Ipe Interface Unit

    When it is determined that the Remote IPE is operating correctly, follow the steps in Procedure 51 "Reinstalling covers" (page 149). Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 149: Reinstalling Covers

    If using the MMI terminal, log out to complete the test and troubleshooting session. —End— Packing and shipping defective cards To ship a defective card to a Nortel repair center, follow the steps in Procedure 52 "Packing and shipping defective cards" (page 149). Procedure 52...
  • Page 150 150 Remote IPE maintenance Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 151 A31 #1 external buffer A31 #1 internal context memory (phase A) A31 #1 internal context memory (phase B) Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 152 — a co-located IPE Module indicated by the Controller Card, the backplane, and the I/O panel — three SUPERLOOP connections to the Fiber Remote Multi-IPE Interface unit Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 153 — Shows the MMI terminal connection, the system monitor connection, and the fiber-optic link connection. Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 154 154 Appendix A Peripheral Controller HEX codes and cable connection diagrams Figure 15 Local site single Fiber Remote Multi-IPE Interface unit cable connection diagram Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 155 Fiber Remote Multi-IPE Interface units connection diagrams 155 Figure 16 Local site multiple Fiber Remote Multi-IPE Interface units cable connection diagram Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 156 156 Appendix A Peripheral Controller HEX codes and cable connection diagrams Figure 17 Remote site single Fiber Remote Multi-IPE Interface unit cable connection diagram Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 157 24 Peripheral Controller 122 physical architecture 14 Remote IPE MMI 122 Superloop Network 122 configuration default 90 Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 158 34 software 120 forced switch-over test 111 dip-switch manual switch-over 110 S1 and S2 configuration 49 redundant 55 Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 159 106 remote superloop cables 83 link protection switching, checking 110 superloop cables 48, 61 Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 160 136 password MMI commands Host SDI mode 96 list 101 MMI mode 96 MMI port Peripheral Controller card Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 161 S1 and S2 48 Superloop Network card 144 switches, enable/disable 119 reports switching generating traffic 113 checking link protection 110 Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 162 107 self-test 117 testing fiber-optic link 141 yellow alarms superloop 139 overview 118, 120 tests continuity 121 Nortel Communication Server 1000 Fiber Remote Multi-IPE Interface Fundamentals NN43021-556 01.01 Standard Release 5.0 30 May 2007 Copyright © 2007, Nortel Networks...
  • Page 164 Users must take full responsibility for their applications of any products specified in this document. The information in this document is proprietary to Nortel Networks. Nortel, the Nortel Logo, the Globemark, SL-1, Meridian1, and Succession are trademarks of Nortel Networks. All other trademarks are the property of their respective owners.

Table of Contents