Procedure; Provisioning And Verifying The External Alarms - Nortel SONET AccessNode 800A Series Manual

Procedure 8-1

Provisioning and verifying the external alarms

This procedure explains the provisioning recommendations and how to
provision the software controlled S800A external alarms.
Alarm definitions are described in Table 8-1 on page 8-4.
Wiring options and connection points for standard customer reserved option
alarms are reflected in Procedure 8-2 on page 8-5, "Wiring customer reserved
optional defined external alarms".
Reference information on the S800A alarm wiring diagrams is contained in
Chapter 13, "Cabinet and equipment wiring and cabling".
Documentation
See Interconnect schematic IS1W00.
Tools required
There are no special tools required for this procedure.
Materials required
There are no material requirements for this procedure.
AccessNode Series 800A Outside Plant Cabinet Installation 323-3001-210 Issue 1.0
Provisioning the external alarms 8-3
—continued—