Table of Contents
Advertisement
2-30 Installing the cabinet
Procedure 2-4 (continued)
Mounting the cabinet on the pad
Step
16
Figure 2-15
Eyebolt removal
17
AccessNode 323-3001-210 Issue 1.0
Action
Replace the bolts with the stainless steel hex head bolts and the existing
washers that are included with each cabinet (see Figure 2-15).
Note: Do not remove the desiccant pouches from the bottom of the
compartments until commercial power is connected.
Seal around all conduit entrances and cables, using plug compound or
equivalent to ensure a watertight seal against moisture.
—end—
FW-15117
FW-15117
Advertisement
Table of Contents
