Advertisement
Basic Operation and Trial Run
Stop/Reset
G
H
● Number word comparison table
AC10 Series Frequency Inverter Technical Manual
Stop/Reset
When the command given channel is keyboard control, press this key to stop the
drive; the parameter [F04.08] can be used to define whether other command
channels are valid; the drive resets when pressing the key in fault status.
Digital potentiometer: clockwise to increase the operating value, counterclockwise
to decrease the operating value
Set key: After modifying the value, press this key to confirm the modified value.
Left/Right shift
Move left and right operation bits
Jog/Reverse
Select the function of the key by parameter [F11.02], 0: reverse 1: jog
24
Advertisement
