Advertisement
Parameter details
Code (Addr.)
Adjustable
Name
attribute
F10.52
Number
(0x0A34)
recovered
READ
Indicates the number of self-recovery faults that have been performed. It is convenient for the user to confirm the usage status of the fault self-recovery
function. This parameter is a read-only parameter.
11.13 F11 Group: keyboard parameters
F11.0x group: button operation
Code (Addr.)
Name
F11.00
Parameter and key
(0x0B00)
lock selection
RUN
0: not locked
The parameter and key lock function are invalid.
1: function parameter lock
It is forbidden to modify the parameters of all function parameters. (In addition to the function code specified by the up and down keys, you can modify the
value by the up and down keys). The keyboard cannot enter the modification parameter interface, and the monitoring amount can be selected by shifting
the keyboard. All key functions on the keyboard are not locked.
2: Function parameters and key lock
Locks the setpoints of all function parameters. The keyboard cannot enter the modification parameter interface, and the keyboard monitoring amount
cannot be selected. It is forbidden to modify the parameters. At the same time, all the keys except RUN/STOP/JOG/PRG on the keyboard are locked.
3: Function parameters and key lock
Locks the set values of all function parameters, prohibits modification of parameters; and locks all keys on the keyboard except PRG.
Note:
Double-line digital tube keyboard unlocking method: Double-line digital tube keyboard displays "CodE" on the first line of the keyboard after
pressing the "PRG" menu button. You can use the up and down keys to enter the user password (F11.01 - user password) in the second line
and then press the "SET" button to unlock.
Single-line digital tube keyboard unlocking method: Single-line digital tube keyboard displays "CodE" after pressing "PRG" menu button. Then
press the "SET" button to display the flashing input cursor. Enter the user password (F11.01-user password) through the up and down keys
and press the "SET" button again to confirm.
The user password is a protective parameter set by the customer to protect the drive parameters arbitrarily tampering. After the password is
set, the password should be properly kept in case it is inconvenient to modify the parameters later.
After unlocking, entering the monitoring interface will exit the unlocking. You need to enter the password again to enter the parameter interface.
Code (Addr.)
Name
F11.01
(0x0B01)
Key lock password
RUN
Code (Addr.)
Name
F11.02
Keyboard
(0x0B02)
function key selection
STOP
0: invalid
1: Reverse run key
2: Forward jog operation key
3: Reverse jog run key
4: Keyboard command channel and terminal naming channel switch
5: Keyboard command channel and communication naming channel switch
6: Terminal command channel and communication naming channel switch
7: keyboard, terminal, communication command channel cycle switching
Code (Addr.)
Name
AC10 Series Frequency Inverter Technical Manual
Content
V/F SVC
of
failures
Indicates the number of self-recovery faults that have been performed. This
parameter is a read-only parameter.
Content
V/F SVC
Content
V/F SVC
Used to set the key lock password
-function button selection
Content
multi-
V/F SVC
Content
168
Factory setting
(Setting range)
0
Factory setting
(Setting range)
0
(0 ~ 3)
Factory setting
(Setting range)
0
(0 ~ 65535)
Factory setting
(Setting range)
1
（0 ~ 7）
Factory setting
(Setting range)
Advertisement
