This group of parameters is used to set the operating frequency of the fifteen-segment speed in the PLC program operation and multi-step speed control.
Multi-segment speed control has priority next to jog control. When the user selects multi-speed operation, it is necessary to set 4 multi-function input
terminals as multi-speed control terminals. For details on how to set it, refer to [F05.00~F05.09] for details.
-speed 1
Code (Addr.)
Name
F14.00
(0x0E00)
PLC multi-speed 1
RUN
-speed 2
Code (Addr.)
Name
F14.01
(0x0E01)
PLC multi-speed 2
RUN
-speed 3
Code (Addr.)
Name
F14.02
(0x0E02)
PLC multi-speed 3
RUN
-speed 4
Code (Addr.)
Name
F14.03
(0x0E03)
PLC multi-speed 4
RUN
V/F SVC
0: Invalid, no sleep detection
1: effective for sleep detection
Content
V/F SVC
Used to set the PID sleep frequency
Content
V/F SVC
Used to set the PID sleep delay
Content
V/F SVC
Used to set the PID wake-up deviation
Content
V/F SVC
Used to set the PID wake-up delay
Content
V/F SVC
Set the first run frequency of the PLC program operation and multi-step
speed control
Content
V/F SVC
Set the second stage running frequency in PLC program operation and
multi-step speed control
Content
V/F SVC
Set the third stage running frequency in PLC program operation and multi-
step speed control
Content
V/F SVC
Set the 4th stage running frequency in PLC program operation and multi-