Table of Contents
Advertisement
Chapter 1 Quick Start
of the screen would change accordingly. Press down this knob to quickly switch
the horizontal time base adjustment mode between "Coarse" and "Fine".
Wave
Math: indicates the math operation key. Press this key to enable the math
⚫
operation function. The math operations include A+B, A-B, A× B, A/B, FFT, and
etc. Besides, you can also set the math operation label.
LA: indicates the logic analyzer key. Press this key to open the logic analyzer
⚫
control menu. You can enable or disable any channel or channel group, modify
the waveform sizes of the digital channel, modify the threshold of the digital
channel, and group the 16 digital channels. Besides, you can also set a label for
each digital channel.
Ref: indicates the reference waveform key. Press this key to open the reference
⚫
waveform setting menu. You can compare the actually measured waveform with
the reference waveform to locate the circuit failure.
Decode: indicates the decode key. Press this key to open the decode setting
⚫
menu, and then you can set the decode options. MSO8000 series supports the
parallel decoding and many protocol decodings. (For details, refer to the
descriptions in "Protocol Decoding").
Wave Vertical
⚫
Rotate the knob to adjust the vertical position of the current digital channel
waveform, the vertical position of the math operation waveform, the vertical
position of the reference waveform, or the vertical display position of the bus
decoding.
MSO8000 User Guide
POSITION: indicates the waveform vertical position knob.
RIGOL
1-17
Advertisement
Table of Contents
