To Save Wave - Rigol DHO924S User Manual

23.2.2
DHO900 User Guide
1.888.610.7664
236
Click or tap the input field of File Path, then the disk management interface is
displayed. Select the target directory and then click or tap OK to set the file path.
For detailed operations, refer to descriptions in
When a USB device is not connected, the default file path is the "Local Disk";
when a USB device is detected, the path is automatically set to "D:".
• Overlay
Click or tap the Overlay on/off switch to enable or disable the overwriting
function. When this function is enabled, the existing file in the specified file path
will be overwritten by the newly saved file that has the same filename as the
existing one.
Click or tap Save, the current screen image is saved based on the settings and the
storage menu is disabled.
TIP
When the quick action function is set to "Save Image" or "Save Group" with "Save Image"
selected, you can press the front-panel

To Save Wave

In the Storage menu, click or tap the Save tab to enter the save operation menu. In
this menu, click or tap the drop-down button of Choose to select "Save Wave" to
enter the "Save Wave" setting menu. The main settings (e.g. channel on/off state,
vertical scale, and horizontal time base) and waveform data of all enabled channel will
be saved to the internal or external memory.
www.calcert.com
15
10 20
5 25
0 30
Disk Management
key to save the image.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
.
sales@calcert.com