Table of Contents
Advertisement
Programming
6. Press Uninstall Printer.
7. Press the Next button.
The display switches to:
Fig. 148: Uninstalling the barcode printer drivers (4)
8. Select the desired driver.
9. Press the Next button.
10. To uninstall the barcode printer driver, continue to follow the menu
prompts.
5.9 Calibrating the end label printer
The end label printer calibrates itself automatically to the distance of the labels
on the backing material by means of a built-in light barrier. If the distance is
not detected correctly, the end label printer must be re-calibrated.
To do so, refer to page 143 Manufacturer's instructions on the end
label printer.
5.10 Barcodes
This screen is used to define all information of the different barcodes. With
the help of the barcodes a seam record set is linked to the corresponding
barcodes based on the seam record code. When the barcodes defined
here are scanned at the beginning of the sewing process, the machine will
detect the link to the seam record set. The settings stored in this seam
record set will then form the basis of the sewing process.
th
Barcodes can be read up to the 30
digit. If a barcode is longer, the code
can still be scanned, but the information can no longer be read starting
st
with the 31
digit.
154
Operating Instructions 550-D800 - 01.0 - 05/2023
Advertisement
Table of Contents
