Table of Contents
Advertisement
Operation
Fig. 46: Pressing the pedal
(1) - Sew end bartack and
(2) - Lift sewing foot
The pedal (5) starts and controls the sewing process.
Initial situation
The pedal (5) in position 0 (3):
The machine is at a standstill.
To position the sewing material:
1. Press the pedal (5) to position -1 (2).
The sewing foot is lifted.
2. Push the sewing material into the initial position.
3. Press the pedal (5) to position 0 (3).
The sewing foot lowers onto the sewing material.
At seam beginning
To start a seam:
1. Press the pedal (5) forward (4).
The machine sews. The speed increases the further forward
During sewing
To interrupt the seam:
1. Press the pedal (5) to position 0 (3).
The machine stops.
Operating Instructions 550-D800 - 01.0 - 05/2023
cut off thread
Needle and sewing foot are up / down.
the pedal (5) is pressed.
Needle and sewing foot are up / down.
(3) - Rest position
(4) - Sewing active
(5) - Pedal
⑤
④
POS. Max.
③
POS. 0
②
POS. -1
①
POS. -2
57
Advertisement
Table of Contents
