Table of Contents
Advertisement
4. If you do not wish to add a check digit to the barcode, access the drop-
5. To add a check digit to the barcode, access the drop-down menu of
6. Enter the acronyms of the information you wish to include in the barcode
Information
Here, you can enter all information that is listed with an acronym in the list
on the right. You can add the desired acronyms by double-clicking in the
list on the right or by entering them into the Coded Information input field
using the keyboard.
7. If you do not wish to encode the barcode, access the drop-down menu
8. To encode the barcode, access the drop-down menu of the Barcode
Information
If you wish to encode, but not shorten, the barcode, do not enter any val-
ues into the Start Digit, End Digit and Count Digit input fields.
If the barcode becomes too long, you can shorten it to the desired length
without losing any information.
If the barcode including all information has a length of, for instance,
18 digits, but may only be 15 digits long, encode the barcode according
to Modulo36 and enter the following into the Start Digit, End Digit and
Count Digit input fields:
• Start Digit:1
• End Digit: 18
• Digit Count: 15
While it will be encoded according to Modulo36 and converted to the
shorter 15 digits, the barcode will still contain all desired information.
9. Adjust the desired default settings ( p. 192).
10. To adjust the height of the barcode, modify its value in the Barcode
11. If the barcode is the end label barcode, set a checkmark at Barcode
198
down menu of the Check Digit input field and select the option NONE.
the Check Digit input field and select the option of your choice.
into the Coded Information input field.
of the Barcode Encoding input field and select the option NONE.
Encoding input field and select the Modulo36 option.
height input field.
for database part identification.
Operating Instructions 550-D800 - 01.0 - 05/2023
Programming
Advertisement
Table of Contents
