5.21.6 Moving contents
To move contents on the end label:
1. To move contents, press the Move button in the Toolbox.
2. Select the desired content by clicking in the corner at the top left.
The display Move component appears:
Fig. 192: Moving contents (1)
3. To move content, click on the blue arrow buttons.
Fig. 193: Moving contents (2)
4. Once the content has been positioned correctly, click on the green
The display Move component disappears.
196
The marking always refers to the corner at the top left.
checkmark.
Operating Instructions 550-D800 - 01.0 - 05/2023
Programming