Operation
Fig. 2: Switching on the machine
①
②
(1) - Switch
(2) - Main switch
To switch on the machine:
1. Set the main switch (2) to position 1 (On).
2. Press the switch (1) to switch on the uninterrupted power supply (UPS).
The PC boots up, and the software launches. The machine is
checked and initialized.
Information
It may also be necessary to switch on the control and the printer, which
would be indicated by the machine on the control panel.
4.1.2 Scanning barcodes
To prepare the machine for sewing, the following barcodes need to be
scanned:
• Barcode of the needle thread reel ( p. 51)
• Barcode of the hook thread reel ( p. 51)
• Barcode of the bobbin
These three barcodes are requested / scanned automatically as soon as
the machine is switched on.
18
Operating Instructions 550-D800 - 01.0 - 05/2023