Table of Contents
Advertisement
Preparing the machine for operation WITH the scanners
If the barcode scanners for the needle and hook thread are present,
the needle and hook thread barcodes will be scanned automatically.
You will then be shown the following display on the start screen:
Fig. 61: Start screen (5)
To use the display on the start screen if the machine is equipped with
barcode scanners for the needle and hook thread and with a bobbin
barcode scanner:
1. Slide the right hook thread cover slightly to the right.
2. If necessary, align the bobbin such that the bobbin barcode can be
Once the bobbin barcode has been scanned successfully, the display
70
scanned in full.
Hand scanner will disappear.
You are now ready to log in ( p. 75).
Operating Instructions 550-D800 - 01.0 - 05/2023
Programming
Advertisement
Table of Contents
